The SFI 16.1 Latch & Link 5-Point Racing Harness Set has 3" polyester webbing, a pull-down lap belt that adjusts 20"-62", twin individual shoulder belts that adjust 20"-60", a 2" crotch strap, & steel hardware with 3" ends.
RaceQuip’s Latch & Link 5-point auto racing harness set has twin individual shoulder belts and is manufactured using premium 3" polyester webbing and drop forged steel hardware to exceed the SFI 16.1 rating. Shoulders adjust from 20" to 62" and the lap belt adjusts from 20" to 60". All RaceQuip 711 series belts come as a "pull down lap" design, which means that the lap belts must be pulled down and away from the center latch & link buckle mechanism to tighten. All RaceQuip Latch & Link motorsports harness sets are distinguished by a pivoting "hammer," called a Duckbill, which is located on the lap belt and locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub-belt are hooked over the link; the link is inserted into the latch on the lap belt; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place. Since RaceQuip seat belt sets are "double adjustable", lengths are simply adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a roll bar or by bolting them in place with the supplied ends (bolts not included). Snap hook ends and eyebolts are sold separately if the user wishes to install belts in that manner. NOTE: RaceQuip harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a racecar to a roll cage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set or seat belts. All SFI 16.1 rated RaceQuip harness sets can be re-webbed and re-certified upon expiration. Available in black, red, blue, yellow, purple, platinum, green, pink, and orange - one "set" of seat belts equals one seat.
  • SFI 16.1 Rating-Tags Affixed; NOT D.O.T./FMVSS Certified; 3" Polyester Webbing; Twin Individual Shoulder Belts adjust 20"-62"; Pull Down Lap Belt adjusts 20"-60"; 5-Point Design; 2" Crotch Sub Strap; Wrap Around or Bolt-in Mounting
California Proposition 65 No
Country of Origin (Primary) CN
Emission Code Legal US
GTIN 00887753071293
Harmonized Tariff Code (Schedule B) 8708210000
Hazardous Material Code N
Life Cycle Status Code Available to Order
NAFTA Preference Criterion Code B
SDR Required Flag N
Standard Pack ST

Write a review.

Note: HTML is not translated.
    Bad           Good

Racequip 711001 SFI 16.1 Latch & Link 5-Point Racing Harness Set (Black)

Product Information

  • Brand: Racequip
  • Product Number: 711001
  • $79.95

Tags: auto racing, SFI 16.1 seat belts, race car motorsports safety gear, 5 pt. harness set, NHRA IMCA